Old racer, new RC8.2 - RTR - Reversed Fuel Lines!?!
The Question: I'm not planning on racing, and I have purchased a brand new .21 vs engine (same as stock) on ebay as a backup.. But it would be fun to experiment with engines. Are most engines similar...
View ArticleRC8.2 Wheels, Tires, etc...
So what do you guys like for wheels and tires for bashing around? I've pretty much roasted off my stock tires on my RC8.2, and I'm thinking of a non-stock set. I don't race, will be using this mostly...
View Article8.2 rtr chassis vs. the +3mm FT
I just bought the FT 3mm added chassis. Is there a noticeable advantage to the factory team chassis? Is it 3mm thicker? B/c on the team site it says 3mm 'longer'... I'm hoping it's worth it's weight in...
View ArticleWhich B-plate to buy?
Seems there's two types? A 'low' B plate and a standard b-plate. What's the difference? Mine's an RTR, but I have an upgraded +3mm gold chassis sitting on the side I bought. Which one will fit the +3mm...
View ArticleA little help guys...A B C D plate set on amazon? good buy?
I saw this and it looks nice and cheap, I want all the plates.... Can I interchange these plates with my RTR? ie will I need any other parts get them on? b/c it seems the A and D plates are partials?...
View ArticleNew RC8.3 coming soon...?
Did you notice that AE's pro racers are posting more and more pics of the RC8.3 prototype? Will it be announced soon?
View ArticleIs this the new RC8.3?
Cavalieri posted this picture on his Facebook page... Is this the new RC8.3? View attachment 2140
View ArticleKyosho Inferno wheels on RC8.2
These should fit, right? http://www.ebay.com/itm/Kyosho-Infe...Control_Parts_Accessories&hash=item339ccd4e96 I like the look of them, as opposed to basic discs. Everything seems to be discs discs...
View ArticleClik here to view.
Team Associated RC8B2
From what I've read on the web, the name for the new Team Associated 1/8 buggy will be RC8B2. And here's a picture from Ryan Cavalieri's RC8B2 (prototype) from DNC 2015. It looks really close to...
View Articlerc 8.2
Finally getting both rc8.2's running without dieing but, just worried about the temperature. Anyone know what the average temperature should be for rc8.2 nitro?
View ArticleRC8.2e converted to road course car RC8.2e GT8
Converting my RC8.2e to on road car RC8.2e GT8 I have been to a couple of races here in the Los Angeles area as well as the San Diego area I have seen electric and nitro powered road cars that were...
View ArticleReedy VR-ST report
You ask Me to let You know My thoughts of My Reedy VR-ST Eng after I raced it. I gave it a 3+ Hr break in with high oil content fuel keeping the temp between 190 and 235. Went to Fear Farm in Phoenix...
View ArticleReedy VR - ST question
I have a 8mm restrictor in it now, what one should I run? I am getting 8min run time now. Running VP 30% in a 8.2 with a 14 bell and 46 spur. Thanks
View ArticleNewbie question about rear diff / drive shaft
Hi! I have an RC8.2e RTR. I recently replaced my rear diff and I am pretty sure it is working fine (when I spin one wheel, the other one spins the other way etc.). I reassembled everything on my pit...
View ArticleClik here to view.
Mamba Monser 2 Best Settings for Track Running
Hey guys, I picked up a Mamba Monster 2 / 2200kv combo. I run on a pretty small / technical track with pretty hard-packed dirt. Anyone have any advice on settings (especially punch control)? Oh and NB4...
View ArticleWhat is the best way.
The Reedy VR-ST Eng is running super. However need some help. What is the best method of retaining the 4 diff mounting screws, front and rear. I tighten them after each run, however they still back...
View Article8.2 nitro diff screws.
I think I found the problem of the rear diff screws popping all the way out. Upon disassembly, when I removed the screw for the rear diff brace there was a dwang. Not good. Long story short, the...
View Article