RC8B3 electric conversion kit??
Anyone knows if the e-conversion kit from Team Associated fit the new RC8B3???
View ArticleCarb needle
So finally got it running nice then it started rich ending itself more and more until it bogs. I took a look and found my .21vs carb high speed needle has back itself out all the way and fell out. On...
View ArticleRC8 / RC8B / RC8.2 bearing chart
Location Size Part number Front diff 8x16mm 25236 Rear diff 8x16mm 25236 Center diff 8x16mm 25236 Steering 6x10mm 31404 Gearbox 8x16mm 25236 Clutch bell 5x10x4mm 25237 Outer wheel bearing 8x16mm 25236...
View ArticleRC.2e Issues
I just picked up a used RC8.2e Factory Team that was rtr for $450. It came with a castle 2200kv motor and Sidewinder 8th ESC, and a lot of extra parts. My plan is to run The Wicked Weekend, the only...
View Articlediff pinion end play?
Just finished RC8B3 build. Raced it Sat nite, been racing an 8.2 for the past year, B3 is like nite and day. It is SUPER. During the build I could not get zero end play on both the front and rear diff...
View ArticleRC8B3 Factory Team Kit - Around for a while?
How long do we expect that the RC8B3 nitro factory team kit will be available for? I guess I ask because the RC8.2 Factory nitro kit disappeared, and was no long available after some time. It seems...
View Articlehow long do u think the rc8.2e will be supported
I just bought a FT 8.2e kit and i have one already. how long do u think i will be able to get parts for it. I dont like the new front steering on the 8.3 it reminds me of the old ofna from 10 years ago.
View ArticleRC8B3 steering blocks and rear hubs
What is the reason for the 3 mm holes and set screws in the front steering blocks and rear hubs ?
View ArticleRC8B3 u-joint failure
Is any body having any u-joint failure at all, not counting crash damage.
View ArticleHelp rc8.2 nitro
ok so its a rtr and brand new, high screw 2 1/4 out low 3 out glow plug is good igniter is good fuel is good (new) starts stalls will not start again fuel lines are not clogged or crossed oh and the...
View ArticleRC 8.2 nitro ?
So I did the A,B,C,D, BLOCKS NOW I WANT TOO DO A TOP PLATE AND A CENTER TOP PLATE AND A FRONT AND REAR CHASSIS BRACE ALL IN BLUE ALUMINUM BUT i CANT FIND THOSE LAST PIECES I CHECKED ON EBAY NO LUCK ANY...
View Articlesteering upgrade on a rtr rc8.2 nitro
how hard is it to change the bell crank steering to the rack? And is it as good as I hear it is, And is just the 3 parts to buy or is there some fab work to be done! Associated 89235 Aluminum Steering...
View ArticleDirt Nitro Challenge - Ryan Cavalieri's RC8B3
Here are few pics of Cav's RC8B3 Read the full story on LiveRC.com http://www.liverc.com/news/special_features/11563-DNC:_Inside_Ryan_Cavalieri's_18-scale_nitro_buggy/ View attachment 2443 View...
View ArticleGrip roll!!
Hi all, My local track is high grip, astro turf and I'm suffering major grip roll with my 8.2e RTR.. I've cut 3 rows off the front mini pins (1 row off the rear), flattened the front shocks as much as...
View ArticleRC8.2 experience
So far I like it, I need to find out how to adjust these breaks tho. I have no brakes at all unless I trim the throttle way up and of course it idles way high so rather then adjusting the idle screw I...
View ArticleRC8.2 starter box
Hi, I would like to get a dual motor starter box. I am going to breaking in a new 121 VS and I here it is a pretty tight motor. Somebody said that even with a engine heater you may break your pull...
View ArticleTon of new parts for the RC8B3 and RC8T3
Associated has just released bunch of new parts for the RC8B3 and RC8T3 https://www.teamassociated.com/news...ew_parts_for_the_rc8t3_and_rc8t3e_team_trucks For RC8T3 and RC8T3e UPC Part # Description...
View ArticleRC8.2 Discontiuned
Whats up with that, I hope parts will still be available for some time. I bought associated because of the parts support and I saw the rc8 has been around for awhile. I thought the rc8.2 was the...
View ArticleClik here to view.
RC8B2 Production Model Posted
Team Associated just reveled this production model on Facebook this afternoon. Woohoo!
View Article